25 LPH RO Plant in Skid

25,000.00

25 LPH Commercial RO Plant has a high purification capacity up-to 25 litres/hour and is suitable for commercial establishments, offices, restaurants and for homes as well. It is also suitable for online purification and attachment with water coolers. Bring home one of these practical and essential water purifiers and make sure you and your family stay healthy. Designed to save space and keep your water safe for drinking, each purifier is constructed smartly.

color

Purple, Red

Features

Features

  • Removes up to 96% dissolved solids (TDS) from the water.
  • Removes Bacteria and Viruses from water.
  • Up to 25 Ltr. Per hour purified water flow.
  • High quality electrical parts such as 150 GPD Pump, 24v 2.5 A SMPS,
  • Very superior and high quality MS Powder Coated Skid.
  • 5 stage Advance purification
  • Service and installation support on Toll Free no. +91 7666 130 387

Electronic Parts and Fitting Material

Electronic Parts

  • SMPS AdaptorAdaptor Output Power: 24VDC 2.5Amp/Max 3.0 Amp, Line Regulation (±): 0.5%, Load Regulation (±): 1%, Ripple & Noise (mV p-p): 250 Features: Overload Protection over Temperature Protection Short Circuit Protection Soft Start Longer service life Current Capacity: 2.5, ampere. SMPS Converts AC voltage to  DC 24V.
  • Low Pressure SwitchIf inlet water is not sufficient or at very low pressure then this switch stop the function of RO.
    Once the inlet water supply starts properly LPS allow RO to function normally.
    LPS avoids dry run of the booster pump.
  • Solenoid ValveA solenoid valve is an electromechanical actuated valve to control the flow of water. Solenoid valve works as an electronic tap, it allow water to go ahead when purifiers is on and it stop water when the purifier is off.
  • 150 GPD Booster PumpThe purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. We use 100 GPD RO Booster Pump for providing reliable inlet pressure for efficient membrane utilization. The offered booster pump is manufactured under the direction of skilled professionals utilizing quality raw material in accordance to the set industry norms.

Fitting Material

  • Inlet ValveInlet Valve is used for connecting your RO/UV water purifiers with water tap inlet connector. It is made up of the standard quality material with the help of advanced technology. It helps to on/off water supply manually.
  • Quick Fitting PipeQuick fitting pipe are mostly used in advance RO water purifiers to make fittings fast easy and leak proof
  • SpannerIn RO water purifiers first stage of purification is Pre-sediment filter which is recommended to clean once in fortnight/month. Spanner is used to open Pre-Filter bowl easily.
  • Teflon Teflon tape is used to make Inlet valve & tap fittings leak proof.

Specification

Specification

Weight 14 Kgs
Flow Rate Up to 25 litres per hour
Stages of Purification Inline Sediment Filter.
Inline Carbon Filter.
RO Membrane.
Post Carbon.
TDS Adjustment using UF.
Membrane type Thin film composite spiral wound membrane
Pump Self-Suction Booster pump 24 V dc
Recovery Up to 50%
TDS Rejection 95% (min)
Power Rating 48 W
Pressure Rating (Input water pressure) 10 – 30 PSI*
Rated Voltage 130 – 270 V a.c.
50 Hz.
Material of construction for filter housings and plastic parts PP
Material of construction of Water Purifier Body ABS Food Grade Plastic
Length of power cord 1.5 m
TDS (Up to which membrane works) 2000 ppm

Installation

Installation

1) Customer has to inform on toll free or mobile when they receives the product.

2) We will arrange technician for installation of water purifier .Installation charges will be Up to Rs.800 to 2500/- depend on location and these charges are to be paid by customer only.

3)  Technician may reach to your place within 12 hr but depend on location it may take 72 hr.

4) Mobile Number of technician will be given to you by SMS only.

5) Your address and registered mobile Number will be given to technician also.

6) It is customer’s duty to check whether installation is proper or not. Customer has to ask technician to show the TDS of pure water (Keep TDS between 30 to 70 ppm). Customer has to check for leakages and all before giving the installation charges.

7) For every visit customer has to pay the technician.

Warranty

Warranty

1) One year warranty on electrical parts, except UV Lamp. Warranty starts from date of dispatch.

2) Filters are consumables not covered in warranty, get blocked or choked because of water only. If water quality is good filters life will be more, If water quality is bad (More turbidity or more TDS) Filters life will be less.

3) Electrical part will be send through courier but technicians charge is to be pay by customer.

Cancellation and Refund

Cancellation:

  1. You can cancel your order anytime before it has shipped, we will refund entire amount.
  2. In case you feel that the product received is not as shown on the site or as per your expectations, you must bring it to the Our notice within 8 hours of receiving the product.

Refund:

  1. If you think, you have received the product in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package and return the package to the delivery person. Also, please email us at [email protected] mentioning your Order ID. We will ensure that a brand new replacement is issued to you with no additional cost after receiving the product back . Please make sure that the original product tag and packing is intact when you send us the product back at your expense.
  2. All refunds will be processed within 10 days of receiving returned product. It will remain the customers responsibility to return the product in unused condition. There should not be any signs of wear and tear on either the product or the box to be eligible for a refund.

Reviews

There are no reviews yet.

Be the first to review “25 LPH RO Plant in Skid”

Your email address will not be published. Required fields are marked *

Shopping Cart